BMP-2 Inflatable Tank

BMP-2 Inflatable Tank - The Classic BMP-2 Full size inflatable tank

Immerse yourself in military history with our full-size BMP-2 Inflatable Tank, a visually stunning and authentic replica. Perfect for military force , this inflatable marvel offers a unique way to own a piece of battlefield history. Explore its features and acquire this impressive full-size inflatable tank to redefine combat and training.

The BMP-2 story begins in the late 1970s when it was introduced as the successor to the BMP-1. With enhancements in firepower and troop-carrying capacity, the BMP-2 quickly became a cornerstone of mechanized infantry units. Its 30mm autocannon and AT-5 Spandrel anti-tank guided missile system made it a formidable opponent on the battlefield.

Today, you can own a piece of history with the i2k BMP-2 Inflatable Tank. We have meticulously recreated the BMP-2's authentic design, capturing the essence of this legendary vehicle while providing a cost-effective solution for your training needs.

Description of the BMP-2 Inflatable Tank

• 1:1 Ratio Inflatable Decoy/Target
• Thermal Signature: Engine compartment & tank tracks
• RTE: Radar Target Enhancers
• Underlayment of foil/fabric under exterior vinyl skin
• External Details: Custom PMS vinyl and full digital printed 3D tracks
• Temperature Allowances: -30 to +150 Degrees Fahrenheit (-20 to +60 Degrees Celsius)
• Wind Capability: Able to withstand 35mph winds
• Inflation Time: Average of 20-30 minutes
• Continuous air flow needed (Must use electricity or a
• Gasoline/diesel generator)
• Storage Area 1.25x1.75x2m (inflatable & blowers)
• Gross Weight 225lbs (102 kilos)
• Inflation Motor Type 120v/230v blower
• Petrol/Diesel generator/blower(s) optional
• Dimension:
  
  • Length: Approximately 6.73 meters (22 feet 1 inch)
  • Width: Approximately 2.94 meters (9 feet 7 inches)
  • Height: Approximately 2.45 meters (8 feet 0.5 inches)

Color Reference 

• Moscow parade

• Afghanistan early 1980s

• Afghan 

• Algerian BMP-2

• Armenian 

• Russian 

• Ukrainian 

• Germany winter 

• Finnish

• Iranian 

• Kuwaiti Army

• Russian 

• German  Motorschtz

• Russian 1994 

• Indian BMP-2 Sarath

• U422

• Ukrainian  2014

Packing List

• (1) 1.5 hp blower
• (8) 18”x1” ground stakes
• (1) Engine thermal blanket
• (2) Tank Track thermal blankets
• (1) Deluxe repair kit

Add-ons

• 3D-printed guns
• Portable generator (gasoline or diesel)
• Gasoline-powered inflation blowers
• Collapsible Bulk Container w/lid
• Netting

Advantages of the BMP-2 Tank Inflatable Decoy

• Deception and Misdirection: The decoy effectively confuses enemy intelligence, diverting their attention and resources away from actual military targets.
• Force Multiplication: By deploying inflatable decoys strategically, a smaller force can appear much larger, creating the impression of a more substantial military presence.
• Risk Reduction: The use of decoys helps reduce the risk of actual military personnel and equipment by drawing enemy fire away from real assets.
• Tactical Flexibility: Inflatable decoys can be quickly deployed and repositioned, allowing for adaptive tactical deception and response to changing battlefield dynamics.
• Easy Transportation: The lightweight nature of inflatable decoys makes them easy to transport and rapid deploy across various operational areas.

Instructions

1. The Inflatable Target/Decoy may weigh over more than 200-600lbs. (depending on the model), so caution should be exercised when moving/inflating/loading/unloading and handling the equipment. Always use heavy-duty dolly with steel fenders such as Monster Mover to move your Target/Decoy and staff should always wear back support belt.
2. Be sure the area that you will be setting up your Target/Decoy is free of all debris including any rocks or sharp objects. Grass or hard ground is fine for set up if there are no rocks, debris, or sharp objects.
3. You may opt to lay out a ground tarp to protect the Target/Decoy, but not necessary.
4. The inflated Target/Decoy requires clearance from adjacent obstacles is a minimum 5’ (1.5m) around and above the perimeter of the Target/Decoy with an additional 15’ (4.5m) clearance from utility lines.
5. Unroll the Target/Decoy and lay flat in the desired direction/orientation.
6. Tie off any unused blower tubes and be sure that all zippers/flaps are closed.
7. The Target/Decoy is to be anchored by a minimum (6)18" x 12” ground stakes at 85% depth. Anchoring should be applied at a 90 degrees angle (i.e., perpendicular)
8. If anchoring on a hard surface such as asphalt or cement, a minimum of 80lb sand or water bags should be required per anchor location. Aircrafts can be anchored to tie-down rings.
9. Connect inflation blower to the air tube using strap attached and close off the additional air tubes by twisting the tube several times and fold it over and secure snugly with attached strap.
10. Now you can install your heat signature radiant blankets (if it wasn’t installed from the factory). Locate the velcro flaps to attach the thermal blanket(s). (Note: tanks will have thermal blankets in the engine compartment and both tracks. Other vehicles will have thermal blankets in the engine compartment and generators.
11. Plug your inflation blower(s) into the closest properly grounded (GFCI) 110v or 220v (depending on your power source/Country) outlet or gasoline/diesel generator.

FAQs

Q: What advantage does the inflatable decoy offer in terms of adaptability on the battlefield?

A: The BMP-2 Inflatable Tank decoy is highly mobile and easy to deploy, allowing for adaptability in tactical deception on different terrains.

Q: How does the inflatable decoy contribute to risk reduction for real military assets?

A: By attracting enemy fire away from actual BMP-2 tanks, the decoy helps reduce the risk of real military personnel and equipment.

Q: How can the decoy influence the perception of the opposing forces?

A: The presence of the inflatable decoy can psychologically impact enemy forces, causing confusion and uncertainty about actual military capabilities.

Q: What makes the BMP-2 Inflatable Tank decoy a cost-effective solution?

A: Compared to acquiring real BMP-2 tanks, using inflatable decoys offers a more budget-friendly option while maintaining the illusion of a larger military force.

The Significance of the BMP-2 Tank in Military Operations

The BMP-2 holds immense importance in warfare due to its versatility and effectiveness on the battlefield. As an infantry fighting vehicle, it can transport troops, provide fire support with its 30mm autocannon and anti-tank guided missiles, and maneuver swiftly with its amphibious capability. This enhances the mobility and firepower of ground forces, making it a valuable asset for offensive and defensive operations. The BMP-2's ability to operate in diverse environments, including urban areas, coupled with its proven performance in various conflicts, solidifies its role as a crucial and reliable component of modern military forces.

Advantages of the BMP-2 Tank

• Quick Deployment: The inflatable decoy can be rapidly deployed and repositioned, making it an agile tool for tactical deception and surprise attacks.
• Operational Security: By diverting enemy attention, it helps protect actual military assets and sensitive areas, enhancing overall operational security.
• Training and Preparedness: The use of inflatable decoys supports training exercises, allowing military units to practice deception tactics and improve their readiness for real-world scenarios.
• Minimal Maintenance: Unlike real military hardware, the inflatable decoy requires minimal maintenance, saving precious time and resources for the military.
• Integration with Deception Strategy: As part of a comprehensive military deception strategy, the BMP-2 Inflatable Tank adds significant value to optimizing resources and influencing the perception and actions of opposing forces.